Can't be shipped in DHL

Try to enjoy the speed of FPV, try to do an exciting dogfight?

Now, u have the falcon flying wing, as usaul, the airplanes from skywalker-model always have special considerations for FPV flying, the falcon have some features suitable for FPV as below:

1: 1340 wing span, strong EPO build with strenthencarbon rods, excellent stable flight performance

2: Spacious cabin and special place for video devices.

3: Excellent gliding performance, Attractive appearance

4:Good controllability, fast or slow radomly as your wish.

Length: 620mm (24.4")
Wingspan: 1340mm (52.8")
Wing Area: 31.3dm2
Wing Loading: 16.3g/dm2
Weight (approx): 510g

Requirement:
4ch Radio
2 x 9g servos
Lipo Battery: 1500-2200mAh 3S
Propeller: APC 6040E
ESC: 20A
Motor: 2208 1900KV

Download the  manual

Falcon flying wing, excellent gilder performance(without any power) from BEVRC on Vimeo.

Falcon flying wing from BEVRC on Vimeo.

 Falcon Wing, June 14, 2011

Received the plane in quick time. Heavy box and no damage. An excellent looking plane. Some wing and tip assembly fits are not as precision as they should be, but more than good enough for a good line up of surfaces. The ailerons seemed very stiff to move on the original foam hinge, so I cut them free from the wing and fixed them with good pinned hinges. Can not wait to fly and see how it handles. Good stuff BEVRC.

 Falcon, January 24, 2011

This is my 3rd RC plane and my first wing. I was intimidated at first, but found that it is incredibly easy to fly compared to my EasyStar. The light winds have almost no effect on it. It goes where you point it and makes flying a pleasure. It is a nice change from the trainer type planes I\'ve been flying that need constant attention to stay on course. Now I need to load it up with FPV equipment.

 What ashame the kit is cripled, January 10, 2011

The company that makes such a nice plane decided to spare some money and made the wings joining carbon-fibre tube not long as it should be. The kit is designed to accommodate 640mm tube as a wing joint. They only put 500 mm in the kit. I went to the shop and bought proper length. I complained about this to BEVRC. They said 500 would be enough. How funny. If it was so, the manual would say 500 and not 640 and the spar in the wing would not be as long. The plane is nice - but this will make you mad.

 Falcon, November 11, 2010

Very good flyer. Glides well. Responds to control inputs well. Relatively robust and easy to repair. Relatively easy to build, even without instructions. Decent performance with a 1900kv 150 watt outrunner. Very good performance with a 2200kv 240 watt outrunner. At 50 flights this plane is definately a keeper.