Buy yours directly from the world's factory

Wee is Online to help you.

Related Searches: Skywalker, FY20A, FY21AP, 2.4G LRS, 5.8G, 2.4G 500mw, Falcon, Fatshark, CEOSD, Piano HDD, video splitter, 180 degree servo, 900Mhz

BEV 5.8G 200mW pulg and play system specially designed for FPV

item#: BEV 5.8G 200mW

Start from: 1 Unit(s)

Qty.Range(unit)	Price(per unit)	Discount
1	0	No
Large Order:

0+ Shipping Cost

Quantity:

Product Details

Download the manual here:

This is another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios.

The 200mW 5.8 GHz transmitter and receiver are capable to go take your audio and video wirelessly where many others transmitters can't.

The tiny pocket size receiver besides its small size, it also comes with two (2) A/V outputs to easy connect two video displays or 1x video display and 1x video recorder simultaneously.
To complete the easy use of this system, the transmitter which is provides clean 12 volts to power any of our 12 volts DC cameras even share power with the motor.

We flew this combo with the stock whip antennas, and even so we got to go at 1Km (3/4 of a mile) at 500' feet high.

With a high gain patch antenna connected to the receiver we are getting ranges about 1.7+ km (1+ mile).

It's great and reliable system, with all the important features that plug and play systems must to have.

2.4-5.8G TR.jpg

Transmitter's features:
- High grade switching regulator.
- Built-in microphone with volume control.

- Working voltage: DC 7-16 volts
- Camera output: same as input

- 8 Selectable channels: DIP switches
- Working frequencies: CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645 - CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945

- Current consumption: 180mAh

- Digital phase-locked loop circuit, no channel drift issues.

- High quality noise filtering circuit.
- Regulated output voltage for the camera.
- Low profile circuit board.
- All Molex type of lathed plugs for safe connections.
- Dimensions:14 x 26 x 39 mm (0.45" x 1" x 1.5" inches).
- Weight 26 grams (0.9 oz).

Receiver's features:
- Dual (2x) A/V outputs.
- 8 Selectable channels: DIP switches
- Working frequencies: CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645 - CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945
- Working voltage: DC 9- 13 volts- Current consumption: 120mAh
- Dimensions:13 x 52 x 60 mm (0.4" x 2" x 2.5" inches).
- Weight 48 grams (1.7 oz).

Includes:
- TXV582 5.8 GHz 200mw transmitter
- R5800 5.8 GHz pocket size receiver
- Transmitter's power plug with leads

- - Receiver's A/V out cable with RCA plugs(if u need another cable, please check here)

- 1 power plug with lead for Rx

- 1 SMA converter for Rx

- 2x 3dBi whip antennas
- 12 volts camera with a plug and play cable can be added to this combo. (see below for this option)

TX:

Always check the color of every wires, then you won't go wrong.

The 2-pin connector:

RED: DC7-16 Volts input

BLACK: GND

The 5-pin connector:

RED: V output for your cam, normally 0.5V less than the DC input from the 2-pin connector.

BLACK:GND

YELLOW: VIDEO

WHITE: AUDIO (6.0Mhz),normally no use

GREEN:AUDIO(6.5Mhz),normally no use

RX:

Please check the channel settings sticker on the Rx.

Print Page

Product Reviews:

nice system - but read

Shipping from China to Singapore was excellent, it didn\'t even take 5 days. The parcel arrived in good condition. the TX came with heat sleeve (transparent) on, so it was ready to start. Forums discussed issues with wrong polarities of the cables, ie. red (+) and black (-) was exchanged - mine was good. Everyhting alright. Test 1: Range about 10m (!), unbelieveable... all good reviews - what happened? So when you unpack this - you need to check the channel setting! Essentially the careful reader will notice different settings/instructions: a) on this webpage (TX/RX) b) on the back of the receiver (RX) conclusion: they don\'t match! Bevrc, could please check the RX that is posted on the website, it\'s incorrect. the correct setting for Rx is on the back the back of the rx, on a sticker. the correct setting for Tx is on this website. My inital setup was wrong and it took me quite some time to understand why. After his was fixed, the range was \"in terrible conditions\" (=surrounding buildings, walls, radio pollution) at least 400m without glitches. So far so good. Please update, then 5 stars, I will order here again. Thumbs up!

forget the rest

We have tried all different types of RF video downlink & this NEVER fails, its great for FPV/AP & AV, dont bother with 900MHz or 1.3GHz, stick with this 5.8GHz, its so simple to install & weighs next to nothing. The dual outputs on the receiver means I can wear my fatshark googles whilst allowing others to view on a LCD monitor. Love it.

Manual

I recieved my TX/RX-Set last week. Unfortunately in was shipped without any documentation, manual or wiring diagram. As I read in some forums about switched cabeling connections (red and black cables are switched): Does anybody know the correct cable colors corresponding to video and audio signals? Thanks, Thomas

antenas?

I get mine today .. the box was intact and it arrived in about a week in Romania. my biggest question is : I have 2 types of antenas a shorter and a longer one... witch one goes to rx and witch one goes to tx?

habiltug

no rewiev

fpv

high-quality electronics for amateurs with safety features, highly recommend

Very good product. I've been using the 2.4 ghz version but I changed to 5.8ghz to avoid 2.4ghz rc disturbance. I've got another kit to be installed on other planes and helis.

very good FPV system and no problem with 2,4Ghz radio control in your plane .

This is really a P&P system, what's more, I fly 1km with it even use the stock antenna, amazing!! But there is one thing I need to talk to BEV, why the Tx don't optput a DC 5v to my kx555 cam,just optput a filtered 12v, I have to use another 12v cam.

Write a Review:

Tell us what you think about BEV 5.8G 200mW pulg and play system specially designed for FPV, share your opinion with other people. Please make sure that your review focus on BEV 5.8G 200mW pulg and play system specially designed for FPV. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

Have any question or inquire for BEV 5.8G 200mW pulg and play system specially designed for FPV? Please contact Customer Service. (Our customer representative will get back shortly.)