Buy yours directly from the world's factory

Wee is Online to help you.

Related Searches: Skywalker, FY20A, FY21AP, 2.4G LRS, 5.8G, 2.4G 500mw, Falcon, Fatshark, CEOSD, Piano HDD, video splitter, 180 degree servo, 900Mhz

BEV 2.4G 500mW plug and play system specially designed for FPV

item#: BEV 2.4G 500mW

Start from: 1 Unit(s)

Qty.Range(unit)	Price(per unit)	Discount
1	0	No
Large Order:

0+ Shipping Cost

Quantity:

Product Details

2.4-5.8G TR.jpg

Download the manual here:

The tiny pocket size receiver besides its small size, it also comes with two (2) A/V outputs to easy connect two video displays or 1x video display and 1x video recorder simultaneously.

To complete the easy use of this system, the transmitter which is provides clean 12 volts to power any of our 12 volts DC cameras even share power with the motor.

We flew this combo with the a 14 dbi patch antenna with the Rx, and got a range of 8km without any signal lost. It's great and reliable system, with all the important features that plug and play systems must to have.

Transmitter's features:
- High grade switching regulator.
- Built-in microphone with volume control.

- Working voltage: DC 7-16 volts
- Camera output: 12 volts

- 8 Selectable channels: DIP switches
- Working frequencies: CH1:2414- CH2:2432 - CH3:2450- CH4:2468 - CH5:2370 - CH6:2390 - CH7:2490 - CH8:2510

- Current consumption: 300mAh

- Digital phase-locked loop circuit, no channel drift issues.

- High quality noise filtering circuit.
- Regulated output voltage for the camera.
- Low profile circuit board.
- All Molex type of lathed plugs for safe connections.
- Dimensions:14 x 26 x 39 mm (0.45" x 1" x 1.5" inches).
- Weight 26 grams (0.9 oz).

Receiver's features:
- Dual (2x) A/V outputs.
- 8 Selectable channels: DIP switches
- Working frequencies: CH1:2414- CH2:2432 - CH3:2450- CH4:2468 - CH5:2370 - CH6:2390 - CH7:2490 - CH8:2510

- Working voltage: DC 9- 13 volts- Current consumption: 120mAh
- Dimensions:13 x 52 x 60 mm (0.4" x 2" x 2.5" inches).
- Weight 48 grams (1.7 oz).

Includes:
- BEV 2.4 GHz 500mw transmitter
- BEV 2.4 GHz pocket size receiver
- Transmitter's power plug with leads

- 1xReceiver's A/V out cable with RCA plugs(if u need another cable, please check here)

- 1 power plug with lead for Rx

- 1 SMA converter for Rx
- 2x 3dBi whip antennas
- 12 volts camera with a plug and play cable can be added to this combo. (see below for this option)

TX:

Always check the color of every wires, then you won't go wrong.

The 2-pin connector:

RED: DC7-16 Volts input

BLACK: GND

The 5-pin connector:

RED: V output for your cam, normally 0.5V less than the DC input from the 2-pin connector.

BLACK:GND

YELLOW: VIDEO

WHITE: AUDIO (6.0Mhz),normally no use

GREEN:AUDIO(6.5Mhz),normally no use

RX: you can also find the channel diagram on the receiver's mental cover.

Print Page

Product Reviews:

All is good

Good fpv system to fly with 35 mhz radio, no interference. I made 4.1 km with home made 8 dbi patch antenna.

great product

this product is amazing! i am using this with just the stock 3dbi antennas and got a range over 2.5 km! and this for only 75 dollars

Write a Review:

Tell us what you think about BEV 2.4G 500mW plug and play system specially designed for FPV, share your opinion with other people. Please make sure that your review focus on BEV 2.4G 500mW plug and play system specially designed for FPV. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

Have any question or inquire for BEV 2.4G 500mW plug and play system specially designed for FPV? Please contact Customer Service. (Our customer representative will get back shortly.)